Applications of the RVGQ-B1815 High-Vacuum, High-Pressure Vertical Gas-Quenching Furnace

2026-11-06 09:09

In the fields of precision machinery and high-end mold manufacturing, many long-shaft components, cylindrical parts, or large-diameter disc-shaped workpieces are subject to extremely stringent requirements regarding deformation following heat treatment. When processed in conventional horizontal furnaces, such workpieces are prone to bending or distortion—often due to the effects of gravity or the specific method used for loading them into the furnace. In contrast, high-vacuum, high-pressure vertical gas-quenching furnaces effectively resolve this technical challenge through their vertical loading configuration and optimized gas-flow distribution.

SIMUWU RVGQ-B1815 vertical high-pressure vacuum gas quenching furnace with bottom loading design for long shaft heat treatment.

SIMUWU’s RVGQ-B1815 high-vacuum, high-pressure vertical gas-quenching furnace combines a high load capacity with a large effective working zone. It features a zoned heating design that ensures uniform furnace temperature, thereby increasing the pass rate for gas-quenched components. With a maximum gas-quenching pressure of up to 10 bar, the furnace enables ultra-fast cooling within just 6 minutes. It is equipped with a three-stage vacuum pumping system—including a diffusion pump—capable of maintaining an ultimate operating vacuum level of 10⁻⁴ mbar. The detailed technical specifications are as follows:

Furnace Type	RVGQ-B1815 Vertical type,single chamber, internal recycle
Loading method	Bottom Loading
Max. Loading size	Φ1800×1500 (D x H mm)
Max. Loading weight	2200 kg (Including Jig)
Power supply	3 Phase, 380 V(±5%); 50 Hz
Installed power	570 kw
Heating power	510 kw
Water-cooling motor power	450 kw
Max design temp.	1320 ℃
Typical Working temp.	1270 ℃
Temperature uniformity	9 points temp testing ±5 ℃ (Soak the empty furnace sufficiently at 600~1200℃)
Temperature controller accuracy	S Type thermocouple ±1℃
Quantity of heating zones	3-Zone independent temperature control
Heating element	High-purity graphite
Ultimate vacuum	6.7 x 10-5 mbar(cold empty furnace condition, after fully drying the furnace)
Working vacuum	6.7 x 10-4 mbar
Pressure rising rate	≤0.67 Pa/h (cold empty furnace condition)
Cooling method	Air cooling/ Natural cooling
Cooling air	Nitrogen/Argon (purity: 99.99% or 99.999%)
Cooling rate (empty furnace 1200℃~200℃)	< 6 min
Max charging pressure(absolute pressure)	< 10 bar
Partial pressure	50-1000Pa manual and automatic pressure control
Operate method	manual or automatic control
Equipment color	Customized
Note: All temperature, pressure, and vacuum instruments can provide calibration reports for measuring units (additional fees will be charged)